s 

 

8855 MEMORY HiCORDER

For operation analysis of power control systems such as inverters

Extended memory! The 8-channel isolated oscilloscope

To observe carrier and basic waveforms simultaneously by switching, high-speed sampling and an expanded memory are absolutely necessary. Furthermore, an expanded memory has been demanded by users to allow measurement of low-reproducibility events and signals that cannot be triggered. The 20 MS/s high-speed sampling and possible memory of up to 512 megawords (1 GB, optional) of the 8855 MEMORY HiCORDER makes it the best-equipped digital isolated oscilloscope on the market. Use the 8855 to search for and analyze anomalous waveforms in your worksite.

BASIC SPECIFICATIONS

Measurement Ranges Using 8950 ANALOG UNIT/option
5 mV to 20 V/division, 12 ranges (20 division f.s.)
resolution: 1/400 of range
AC voltage for possible measurement/ display using the memory function: 280 Vrms

Frequency Band
DC to 10 MHz ± 3 dB (used 8950 ANALOG UNIT /option)

Time Axis at Memory Function
5 µs to 5 minutes/division, 24 settings; external sampling (100 samples/division, desired setting)

Measurement Functions
(1)Memory
(2)Recorder
(Recorder & Memory, FFT functions to be added, version 2.00 or later)

Number of Input Channels
Analog (up to 8 channels) + logic (16 channels standard)

Memory Capacity
4 M words/channel(Total 32 MW)
Max.64 M words/channel(Total 512 MW, Option)

Data Storage
Floppy disk drive, Type II PC card slot, MO drive (optional), Hard disk drive (optional)

Interfaces
LAN, SCSI

Interfaces (optional, sold separately)
GP-IB: 9558 GP-IB CARD used
RS-232C: 9557 RS-232C CARD used
This function is to be supported from version 2.00 of this unit.

Recording and Display
10.4-inch TFT color LCD, 216 mm (8.5 in) × 30 m (98.4 ft), thermal paper roll

Other Functions
Waveform judgment function*, Scaling, Vernier function*, pulse count function, waveform search function, cursor measurement, comment insertion, other functions
*This function is to be supported from version 2.00 of this unit.

Power Supply
100 to 240 V AC (50/60 Hz)

Dimensions, mass
275 mm(10.83 in)W × 280 mm(11.02 in)H × 170 mm(6.69 in)D, 6.3 kg (222.2 oz) (base unit only)

Accessories
Power cord (1), PC card protector (1), input cord label (1), wave viewer software (1)

s 

 

8841 MEMORY HiCORDER

Mainstream recorder with 16 fully isolated channels

These models, featuring A4-width recording paper and a large color display, have a unique design that allows them to be used both as desktop and flat-bed recorders. They combine portability with high reliability to ensure high performance and easy operation. Setting the standard for portable 16-channel recorders, these models are suitable for capturing a variety of data in a multiple of fields.

BASIC SPECIFICATIONS

Measurement Ranges Using 8936 ANALOG UNIT/option
5 mV to 20 V/division, 12 ranges
(20 division f.s.)
resolution: 1/80 of range
AC voltage for possible measurement/ display using the memory function: 280 Vrms

Frequency Characteristic
DC to 400 kHz ± 3 dB (used 8936 ANALOG UNIT /option)

Time Axis at Memory Function
100 µs to 5 minutes/division, 20 settings (1 division =100 samples); external sampling (500 kS/s, minimum sampling period 2 µs)

Measurement Functions
(1)Memory recorder
(2)Recorder
(3)RMS recorder (50/60 Hz or DC only)
(4)Recorder and Memory
(5)Real-time save
(6)FFT

Number of Input Channels
Analog (up to 8 channels) + logic (16 channels standard) *using 4 units of 8936
ANALOG UNIT
Analog (up to 16 channels) + logic (16 channels standard) *using 4 units of 8946 4ch
ANALOG UNIT

Memory Capacity
4 M words/ch (using 2 channels) to 500 k words/ch (using 16 channels)
*Memory capacity can be expanded 4 times.(Option)

Data Storage
FD drive, Type III PC card slot (SRAM/flash ATA/hard disk card), MO drive (optional)

Interfaces
SCSI (for MO drive connection, standard) Please contact HIOKI for information on compatible MO drives.

Interfaces (optional, sold separately)
GP-IB: 9558 GP-IB CARD used
RS-232C: 9557 RS-232C CARD used
LAN: 9578 10BASE-T LAN CARD used
External Printer: 9559 PRINTER CARD used

Recording and Display
10.4-inch TFT color LCD, 216 mm (8.5 in) × 30 m (98.4 ft), thermal paper roll

Other Functions
Scaling, Waveform parameter calculations, Memory segmentation, Cursor readout, etc.

Power Supply
100 to 240 V AC (50/60 Hz), *10 to 28 V DC, using the 9433 DC POWER
ADAPTER

Dimensions, mass
280 mm(11.02 in)W × 300 mm(11.81 in)H × 140 mm(5.51 in)D, 6.0 kg (211.64oz) (base unit only, MO unit not attached)
280 mm(11.02 in)W × 300 mm(11.81 in)H × 167 mm(6.57 in)D, 6.6 kg (232.8 oz) (base unit only, MO unit attached)

Accessories
Power cord(1), Recording paper(1 roll), Dust cover(1), Roll paper attachment(2), PC card protector(1), Wave viewer software(1)

s 

 

8826 MEMORY HiCORDER

32-channel recorder with all isolated inputs

The 8826 MEMORY HiCORDER can now be connected to a LAN, and when used with a PC makes the ideal recorder for today's Internet-based environment. For use with the 8826, HIOKI provides a wide assortment of input units suitable for all types of signal measurement. The 8826 has a high waveform sampling rate of 1 M sample/s which is carried out for all 32 channels simultaneously.

BASIC SPECIFICATIONS

Measurement Ranges Using 8936 ANALOG UNIT/option
5 mV to 20 V/division, 12 ranges (normal f.s.; 20 division, wide f.s.; 24 division)
resolution: 1/80 of range
AC voltage for possible measurement/ display using the memory function: 335 Vrms

Frequency Characteristic
DC to 400 kHz ± 3 dB (used 8936 ANALOG UNIT /option)

Time Axis at Memory Function
100 µs to 5 minutes/division, 20 settings (1 division =100 samples); external
sampling (500 kS/s, minimum sampling period 2 µs)

Measurement Functions
(1)Memory recorder
(2)Recorder
(3)RMS recorder (50/60 Hz or DC only)
(4)Recorder and Memory
(5)Real-time save
(6)FFT

Number of Input Channels
Analog (up to 32 channels) + logic (32 channels standard) *using 16 units of 8936
ANALOG UNIT

Memory Capacity
4 M words/ch (using 4 channels) to 500 k words/ch (using 32 channels)
*Memory capacity can be expanded 4 times.(Option)

Data Storage
FD drive, Type III PC card slot (SRAM/flash ATA/hard disk card), MO drive (optional)

Interfaces
SCSI (for MO drive connection, standard) Please contact HIOKI for information on compatible MO drives.

Interfaces (optional, sold separately)
GP-IB: 9558 GP-IB CARD used
RS-232C: 9557 RS-232C CARD used
LAN: 9578 10BASE-T LAN CARD used
External Printer: 9559 PRINTER CARD used

Recording and Display
10.4-inch TFT color LCD, 264 mm (10.39 in) × 30 m (98.4 ft), thermal paper roll

Other Functions
Scaling, Waveform judgment, Waveform processing calculations, Waveform parameter calculations, Memory segmentation, Logging print, Clock, Cursor readout, Comment entry, etc.

Power Supply
100 to 240 V AC (50/60 Hz)

Dimensions, mass
401 mm (15.79 in) W × 235 mm (9.25 in) H × 382 mm (15.04 in) D, 11 kg (388.0 oz) (base unit only)

Accessories
Power cord(1), Recording paper(1 roll), Dust cover(1), Roll paper attachment(2),
PC card protector(1), Wave viewer software(1)

s 

 

8842 MEMORY HiCORDER

Mainstream recorder with 16 fully isolated channels

These models, featuring A4-width recording paper and a large color display, have a unique design that allows them to be used both as desktop and flat-bed recorders. They combine portability with high reliability to ensure high performance and easy operation. Setting the standard for portable 16-channel recorders, these models are suitable for capturing a variety of data in a multiple of fields.

BASIC SPECIFICATIONS

Measurement ranges using 8936 ANALOG UNIT /option
5 mV to 20 V/division, 12 ranges (20 division f.s.)
resolution: 1/80 of range
AC voltage for possible measurement/ display using the memory function: 280 Vrms

Frequency Characteristic
DC to 400 kHz ± 3 dB (used 8936 ANALOG UNIT /option)

Time Axis at Memory Function
100 µs to 5 minutes/division, 20 settings (1 division =100 samples); external sampling (500 kS/s, minimum sampling period 2 µs)

Measurement Functions
(1)Memory recorder
(2)Recorder
(3)RMS recorder (50/60 Hz or DC only)
(4)Recorder and Memory
(5)Real-time save
(6)FFT

Number of Input Channels
Analog (up to 16 channels) + logic (16 channels standard) *using 8 units of 8936 ANALOG UNIT

Memory Capacity
4 M words/ch (using 2 channels) to 500 k words/ch (using 16 channels)
*Memory capacity can be expanded 4 times.(Option)

Data Storage
FD drive, Type III PC card slot (SRAM/flash ATA/hard disk card), MO drive (optional)

Interfaces
SCSI (for MO drive connection, standard) Please contact HIOKI for information on compatible MO drives.

Interfaces (optional, sold separately)
GP-IB: 9558 GP-IB CARD used
RS-232C: 9557 RS-232C CARD used
LAN: 9578 10BASE-T LAN CARD used
External Printer: 9559 PRINTER CARD used

Recording and Display
10.4-inch TFT color LCD, 216 mm (8.5 in) × 30 m (98.4 ft), thermal paper roll

Other Functions
Scaling, Waveform parameter calculations, Memory segmentation, Cursor readout, etc.

Power Supply
100 to 240 V AC (50/60 Hz), *10 to 28 V DC, using the 9433 DC POWER
ADAPTER

Dimensions, mass
280 mm (11.02 in) W × 300 mm (11.81 in) H × 140 mm (5.51 in) D, 6.0 kg (211.64oz) (base unit only, MO unit not attached)
280 mm (11.02 in) W × 300 mm (11.81 in) H × 167 mm (6.57 in) D, 6.6 kg (232.8 oz) (base unit only, MO unit attached)

Accessories
Power cord (1), Recording paper (1 roll), Dust cover (1), Roll paper attachment (2), PC card protector (1), Wave viewer software (1)

s 

 

8835-01 MEMORY HiCORDER

High-visibility, Compact, Multi-channeled
Field Measurement has never been easier

The 8835-01 MEMORY HiCORDER is a high-speed waveform recorder with the special features of advanced performance of the basic "wave recording" function for easy field measurement, easy-to-see color display, compact dimensions of an A4-sized paper, and 4/8* channels for measurement. The 8835-01 MEMORY HiCORDER inherits all the functions of the 8835 MEMORY HiCORDER and accommodates a total of 8* channels when used with the input unit group to support a wide range of signals. The 8835-01 also comes standardly equipped with 8x the memory of the previous unit, making long-term recording possible.
* When using the 8946 4ch ANALOG UNIT, maximum input is 30 V rms or 60 V DC.

BASIC SPECIFICATIONS

Measurement Ranges Using 8936 ANALOG UNIT/option
10 mV to 50 V/division, 12 ranges (10 division f.s.)
resolution: 1/160 of range
AC voltage for possible measurement/display using the memory function: 350 V rms

Frequency Characteristic
DC to 400 kHz ± 3 dB (used 8936 ANALOG UNIT /option)

Time Axis at Memory Function
100 µs to 5 minutes/division, 20 settings (1 division =100 samples); external sampling (500 kS/s, minimum sampling period 2 µs)

Measurement Functions
(1)Memory recorder
(2)Recorder
(3)RMS recorder (50/60 Hz or DC only)
(Recorder & Memory/FFT functions to be added, Additional functions provided by the 9540-01 FUNCTION UP DISK)

Number of Input Channels
Analog (up to 4 channels) + logic (16 channels standard) *using 2 units of 8936 ANALOG UNIT
Analog (up to 8 channels) + logic (16 channels standard) *using 2 units of 8946 4ch ANALOG UNIT

Memory Capacity
4 M words/ch (using 1 channel) to 500 k words/ch (using 8 channels)

Data Storage
FD drive, Type III PC card slot (SRAM/flash ATA/hard disk card)

Interfaces (optional, sold separately)
GP-IB: 9558 GP-IB CARD used
RS-232C: 9557 RS-232C CARD used
LAN: 9578 10BASE-T LAN CARD used
External Printer: 9559 PRINTER CARD used

Recording and Display
6.4-inch TFT color LCD, 110 mm (4.33 in) × 30 m (98.4 ft), thermal paper roll

Other Functions
Waveform judgment function*, Waveform processing calculations*, Waveform averaging; memory segmentation waveform parameter processing, logging (numerical printout), X-Y waveform plot, scaling, etc.
*(Additional functions provided by the 9540-01 FUNCTION UP DISK)

Power Supply
100 to 120 V AC or 200 to 240 V AC (50/60 Hz), *10 to 28 V DC using the 9439 DC POWER ADAPTER

Dimensions, mass
285 mm(11.22 in)W × 220 mm(8.66 in)H × 132 mm(5.2 in)D, 4.5 kg (158.73 oz)(base unit only)

Accessories
Power cord(1), Recording paper(1 roll), Dust cover(1), Roll paper attachment(2), PC card protector(1), Wave viewer software(1)

s 

 

8808-01/-51 MEMORY HiCORDER

Compact Size Recorder with Color Display

The 8808-01 MEMORY HiCORDERs, housed in a B5 book-sized, compact, and thin body weighing in at under 1.2 kg, are handy high-speed recorders equipped with features such as analog 4-channel isolated inputs, PC card slot, fax/modem communication, 3-way power supply, and powerful trigger functions. One unit is capable of covering a variety of usages, ranging from low-speed/long-term continuous recording to recording of high-speed transients.

8808-51 has harmonic analysis function. Capable of both instantaneous analysis and time series analysis of harmonics, these units can measure and analyze harmonic current flowing into and out of a commercial power system, as well as harmonic components piggybacking on power line voltage.

BASIC SPECIFICATIONS

Measurement Ranges
10 mV to 100 V/division, 13 ranges (10 division f.s.)
resolution: 1/160 of range
AC voltage for possible measurement/ display using the memory function: 450 Vrms
* 100 V/division excludes the RMS & memory recorder function

Frequency Characteristic
DC to 50 kHz ± 3 dB

Time Axis at Memory Function
200 µs to 5 minutes/division, 19 settings (1 division =80 samples)

Measurement Functions
(1)Memory recorder
(2)Recorder
(3)RMS recorder & memory (50/60 Hz or DC only)

Number of Input Channels
Analog (4 channels standard) + logic (8 channels standard) *fixed input section

Memory Capacity
256 k words/ch (using CH1) to 64 k words/ch (using 4 channels)

Data Storage
Type II PC card slot (for SRAM cards up to 32 MB, flash ATA cards up to 528MB)

Interfaces
RS-232C (the optional 9612 RS-232C CABLE is required for connection to PC) PC card: Commercially available PC card type fax modem (Please contact HIOKI for information on compatible fax modems)

Interfaces (optional, sold separately)
Detachable printer: 8992 PRINTER UNIT can be connected

Recording and Display
5.7-inch STN color LCD, 112 mm (4.4 in) × 18 m (59.06 ft), thermal paper roll

Other Functions
DMM function (voltage shown as numerals on the display), Scaling, Parameter calculations, Cursor readout, etc.

Power Supply
100 to 240V AC (50/60 Hz) with use the 9418-10 AC ADAPTER (option)
9447 BATTERY PACK (Continuous use 3 hours) (option)
LR6 (AA) × 6 (Continuous use 1 hours) (LR6 batteries cannot be used with 8992 PRINTER UNIT)

Dimensions, mass
203 mm (7.99 in) W × 170 mm (6.69 in) H × 52 mm (2.05 in) D, 1.2 kg (42.33 oz)
280 mm (11.02 in) W × 170 mm (6.69 in) H × 52 mm (2.05 in) D, 1.6 kg (56.44oz) (printer attached)

Accessories
LR6/AA alkaline batteries (6), alkaline battery box (1), shoulder belt (1), Wave viewer software (1)

s 

 

8420-01 MEMORY HiLOGGER

All 8-channels Isolated !
Data Loggers with PC Networking Support

Demand has been steadily increasing for multi-channel temperature recording capabilities for use in applications such as environmental protection, energy conservation and HACCP implementation. Satisfying these demands requires a multi-channel measurement instrument with the portability to allow it to be used anywhere, and with LAN support for connection to IT network devices. HIOKI has developed the 8420-01 and 8421-01 MEMORY HiLOGGERs in response to these demands. The LAN connection capability and portability of these instruments make them especially suitable for real-time data collection applications on PCs.

BASIC SPECIFICATIONS

Measurement Ranges
Temperature, voltage, humidity (with optional sensor), cumulative pulses, rotations

Input Channels
Analog 8 channels isolated PHOTO-MOS relays
Pulse Inputs: 4 ch
Logic Inputs: 16 ch (using the 8993 DIGITAL I/O UNIT)

Thermocouple Types
K, E, J, T, N, W (WRe5-25), R, S, and B

Platinum Measurement Resistance Types
Pt 100, JPt 100, 3- and 4-line types

Analog Voltage Input
4 ranges: 100 mV, 1 V, 10 V, 100 V and 1 5 V f.s.

Recording Interval
100 ms to 1 hour (5 s to 1 hour when measuring humidity)
Note: All input channels are scanned at high speed during each recording interval.

Memory Capacity
Internal: 8 MB (4,194,304 data points)
External: up to 528 MB (Flash ATA Card)

Real-Time Save
Waveforms are saved as binary data to the PC Card in real time. Stored data can be recalled by the instrument in blocks of 8 MB each.

PC Interface
RS-232C and 10Base-T Ethernet connectors

Interfaces (optional, sold separately)
8992 PRINTER UNIT (Detachable type) or 8993 DIGITAL I/O UNIT (Detachable type) can be connected

Recording and Display
5.7-inch STN color LCD, 112 mm (4.4 in) × 18 m (59.06 ft), thermal paper roll

Power Supply
(1) 9418-10 AC ADAPTER (12 V DC ±10 %)
(2) 9447 BATTERY PACK (NiMH, when used with AC Adapter, the Adapter has priority)
(3) 12V car battery (using connection cable available upon request)

Dimensions, mass
234 mm (9.21 in) W × 170 mm (6.69 in) H × 52 mm (2.05 in)D, 1.2 kg (45.9 oz) (instrument only, without battery)
310 mm (12.20 in) W × 170 mm (6.69 in) H × 52 mm (2.05 in) D, 1.6 kg (56.44 oz) (with printer, without battery)
302 mm (11.89 in)W × 170 mm (6.69 in) H × 52 mm (2.05 in) D, 1.6 kg (56.44 oz) (with Digital I/O Unit, without battery)

Accessories
9418-10 AC ADAPTER (1), Terminal Cover (1), Screwdriver (1), Wave viewer software (1)

s 

 

8421-01 MEMORY HiLOGGER

All 16-channels Isolated !
Data Loggers with PC Networking Support

Demand has been steadily increasing for multi-channel temperature recording capabilities for use in applications such as environmental protection, energy conservation and HACCP implementation. Satisfying these demands requires a multi-channel measurement instrument with the portability to allow it to be used anywhere, and with LAN support for connection to IT network devices. HIOKI has developed the 8420-01 and 8421-01 MEMORY HiLOGGERs in response to these demands. The LAN connection capability and portability of these instruments make them especially suitable for real-time data collection applications on PCs.

BASIC SPECIFICATIONS

Measurement Items
Temperature, voltage, humidity (with optional sensor), cumulative pulses, rotations

Input Channels
Analog 16 channels isolated PHOTO-MOS relays
Pulse Inputs: 4 ch
Logic Inputs: 16 ch (using the 8993 DIGITAL I/O UNIT)

Thermocouple Types
K, E, J, T, N, W (WRe5-25), R, S, and B

Platinum Measurement Resistance Types
Pt 100, JPt 100, 3- and 4-line types

Analog Voltage Input
4 ranges: 100 mV, 1 V, 10 V, 100 V and 1 5 V f.s.

Recording Interval
100 ms to 1 hour (5 s to 1 hour when measuring humidity)
Note: All input channels are scanned at high speed during each recording interval.

Memory Capacity
Internal: 8 MB (4,194,304 data points)
External: up to 528 MB (Flash ATA Card)

Real-Time Save
Waveforms are saved as binary data to the PC Card in real time. Stored data can be recalled by the instrument in blocks of 8 MB each.

PC Interface
RS-232C and 10Base-T Ethernet connectors

Interfaces (optional, sold separately)
8992 PRINTER UNIT (Detachable type) or 8993 DIGITAL I/O UNIT (Detachable type) can be connected

Recording and Display
5.7-inch STN color LCD, 112 mm (4.4 in) × 18 m (59.06 ft), thermal paper roll

Power Supply
(1) 9418-10 AC ADAPTER (12 V DC ±10 %)
(2) 9447 BATTERY PACK (NiMH, when used with AC Adapter, the Adapter has priority)
(3) 12V car battery (using connection cable available upon request)

Dimensions, mass
234 mm (9.21 in) W × 170 mm (6.69 in) H × 52 mm (2.05 in) D, 1.2 kg (45.9 oz) (instrument only, without battery)
310 mm (12.20 in) W × 170 mm (6.69 in) H × 52 mm (2.05 in) D, 1.6 kg (56.44 oz) (with printer, without battery)
302 mm (11.89 in) W × 170 mm (6.69 in) H × 52 mm (2.05 in) D, 1.6 kg (56.44 oz) (with Digital I/O Unit, without battery)

Accessories
9418-10 AC ADAPTER (1), Terminal Cover (1), Screwdriver (1), Wave viewer software (1)

s 

 

8422-01 MEMORY HiLOGGER

All 32-channels Isolated !
Data Loggers with PC Networking Support

• 32Isolated Channels
• Built-In FTP, SMTP, HTTP Server
• PPP Connection Available

BASIC SPECIFICATIONS

Measurement Items
Temperature, voltage, humidity (with optional sensor), cumulative pulses, rotations

Input Channels
Analog 32 channels isolated PHOTO-MOS relays
Pulse Inputs: 4 ch
Logic Inputs: 16 ch (using the 8993 DIGITAL I/O UNIT)

Thermocouple Types
K, E, J, T, N, W (WRe5-25), R, S, and B

Platinum Measurement Resistance Types
Pt 100, JPt 100, 3- and 4-line types

Analog Voltage Input
4 ranges: 100 mV, 1 V, 10 V, 100 V and 1 5 V f.s.

Recording Interval
100 ms to 1 hour (5 s to 1 hour when measuring humidity)
Note: All input channels are scanned at high speed during each recording interval.

Memory Capacity
Internal: 8 MB (4,194,304 data points)
External: up to 528 MB (Flash ATA Card)

Real-Time Save
Waveforms are saved as binary data to the PC Card in real time. Stored data can be recalled by the instrument in blocks of 8 MB each.

PC Interface
RS-232C and 10Base-T Ethernet connectors

Interfaces (optional, sold separately)
8992 PRINTER UNIT (Detachable type) or 8993 DIGITAL I/O UNIT (Detachable type) can be connected

Recording and Display
5.7-inch STN color LCD, 112 mm (4.4 in) × 18 m (59.06 ft), thermal paper roll

Power Supply
(1) 9418-10 AC ADAPTER (12 V DC ±10 %)
(2) 9447 BATTERY PACK (NiMH, when used with AC Adapter, the Adapter has priority)
(3) 12V car battery (using connection cable available upon request)

Dimensions, mass
234 mm (9.21 in) W × 170 mm (6.69 in) H × 52 mm (2.05 in) D, 1.2 kg (45.9 oz) (instrument only, without battery)
310 mm (12.20 in) W × 170 mm (6.69 in) H × 52 mm (2.05 in) D, 1.6 kg (56.44 oz) (with printer, without battery)
302 mm (11.89 in) W × 170 mm (6.69 in) H × 52 mm (2.05 in) D, 1.6 kg (56.44 oz) (with Digital I/O Unit, without battery)

Accessories
9418-10 AC ADAPTER (1), Terminal Cover (1), Screwdriver (1), Wave viewer software (1)

 

 
Copyright © 2004-2006 Solcom, Inc. All rights Reserved.