s 

 

3511-50 LCR HiTESTER

Compact & Powerful dedicated LCR measurement in 5 milli-second timeframes

• High speed measurement: 5 ms (1 kHz) or 13 ms (120 Hz)
• High precision accuracy: ±0.08 %
• Built-in comparator

BASIC SPECIFICATIONS

Measurement Parameters
|Z|, phase angle, C, L, D, Q, R

Measurement Method
Source: constant voltage 50 mV to 1 V rms (AC)
Sense: voltage, AC

Source Frequency
120 Hz or 1 kHz

Measurement Ranges
|Z|, R: 10 m-Ohm to 200.00 M-Ohm (depending on condition)
phase angle: -90.00 to +90.00°
C: 0.940 pF to 999.99 mF
L: 1.600 µH to 200.00 kH
D: 0.0001 to 1.9900
Q: 0.85 to 999.99

Basic Accuracy
|Z|: ±0.08 % rdg.
phase angle: ±0.05°

Measurement Times
Fast: 5 msec. to Slow: 300 msec.(at 1 kHz)
Fast: 13 msec. to Slow: 400 msec.(at 120 Hz)

Display
99999 full digits, LED

Comparator Functions
Setting: Upper and lower limit, absolute value
Output: 3 levels (Hi, In, Lo), Open-collector, Isolated

External Printer
9442 (use with the 9443-02 or -03/9444)

Power Supply
100 to 240 V AC (selectable type), 50/60Hz

Dimensions, mass
210 mm(8.27 in)W × 100 mm(3.94 in)H × 168 mm(6.61 in)D, 2.5 kg (88.2 oz)

Accessories
Power cord(1), Fuse(1)

s 

 

3522-50 LCR HiTESTER

Impedance meter with a wide test frequency range

The measurement frequency can be freely adjusted with four-digit precision in a wide range from 42 Hz to 5 MHz. In particular, this makes it easy to test sample characteristics in the high frequency range. Operation is extremely simple; touch the item on the screen to be changed, and the possible settings appear in sequence.

BASIC SPECIFICATIONS

Measurement Parameters
|Z|, |Y|, phase angle, Rp, Rs(ESR), G, X, B, Cp, Cs, Lp, Ls, D (dissipation factor), and Q

Measurement Method
Source: constant current 10 µA to 100 mA (42 Hz to 1 MHz), 50 µA to 20 mA (1 MHz to 5 MHz), or constant voltage 10 mV to 5 V (42 Hz to 1 MHz), 50 mV to 1 V (1 MHz to 5 MHz)
Sense: voltage, AC

Source Frequency
42 Hz to 5 MHz

Measurement Ranges
|Z|, R, X: 10.00 m-Ohm to 200.00 M-Ohm (depending on condition)
phase angle: -180.00 to +180.00°
C: 0.3200 pF to 370.00 mF
L: 16.000 nH to 750.00 kH
D: 0.00001 to 9.99999
Q: 0.01 to 999.99
|Y|, G, B: 5.0000 nS to 99.999 S

Basic Accuracy
|Z|: ±0.08 % rdg.
phase angle: ±0.05°

Measurement Times
Typical Values for Displaying
|Z| Fast: 5 msec. to Slow2: 140 msec.

Display
99999 full digits, LCD with backlight display

Comparator Functions
Setting: Upper and lower limit, percentage, or absolute value, Output: 3 levels (Hi, In, Lo), Open-collector, Isolated

External Printer
9442 (use with the 9443-02 or -03/9446/9593-01)

Power Supply
100 to 240 V AC (selectable type), 50/60Hz

Dimensions, mass
352 mm (13.86 in) W × 124 mm (4.88 in) H × 323 mm (12.72 in) D, 6.5 kg (229.3 oz)

Accessories
Power cord (1), Fuse (1)

s 

 

3532-50 LCR HiTESTER

Impedance meter with a wide test frequency range

The measurement frequency can be freely adjusted with four-digit precision in a wide range from 42 Hz to 5 MHz. In particular, this makes it easy to test sample characteristics in the high frequency range. Operation is extremely simple; touch the item on the screen to be changed, and the possible settings appear in sequence.

BASIC SPECIFICATIONS

Measurement Parameters
|Z|, |Y|, phase angle, Rp, Rs(ESR), G, X, B, Cp, Cs, Lp, Ls, D (dissipation factor), and Q

Measurement Method
Source: constant current 10 µA to 100 mA (42 Hz to 1 MHz), 50 µA to 20 mA (1 MHz to 5 MHz), or constant voltage 10 mV to 5 V (42 Hz to 1 MHz), 50 mV to 1 V (1 MHz to 5 MHz)
Sense: voltage, AC

Source Frequency
42 Hz to 5 MHz

Measurement Ranges
|Z|, R, X: 10.00 m-Ohm to 200.00 M-Ohm (depending on condition)
phase angle: -180.00 to +180.00°
C: 0.3200 pF to 370.00 mF
L: 16.000 nH to 750.00 kH
D: 0.00001 to 9.99999
Q: 0.01 to 999.99
|Y|, G, B: 5.0000 nS to 99.999 S

Basic Accuracy
|Z|: ±0.08 % rdg.
phase angle: ±0.05°

Measurement times
typical values for displaying
|Z| Fast: 5 msec. to Slow2: 140 msec.

Display
99999 full digits, LCD with backlight display

Comparator Functions
Setting: Upper and lower limit, percentage, or absolute value, Output: 3 levels (Hi, In, Lo), Open-collector, Isolated

External Printer
9442 (use with the 9443-02 or -03/9446/9593-01)

Power Supply
100 to 240 V AC (selectable type), 50/60Hz

Dimensions, mass
352 mm (13.86 in) W × 124 mm (4.88 in) H × 323 mm (12.72 in)D, 6.5 kg (229.3 oz)

Accessories
Power cord (1), Fuse (1)

s 

 

3535 LCR HiTESTER

LCR meter with the broad frequency range of 100kHz to 120MHz

Measure across the broad frequency range of 100kHz to 120MHz with 3535 LCR HiTESTER. The 6ms high-speed measurement capability is particularly useful with the built-in comparator and load functions, and for BIN (classification) measurements, to suit a wide range of applications such as chip inductor and high speed magnetic head testing, as well as other related research needs. Achieve ultimate measurement flexibility by detaching the head amp unit from the main unit and placing it in proximity to the test object so as to minimize the effect of test leads on measurements.

BASIC SPECIFICATIONS

Measurement Parameters
5 mV to 20 V/division, 12 ranges (20 division f.s.)
resolution: 1/80 of range
AC voltage for possible measurement/ display using the memory function: 280 Vrms

Measurement Signal Level
Open-terminal voltage mode:
5 mV to 1 V, 20mA max. (up to 10.00 MHz)
5 mV to 500 mV, 10 mA max.
(above 10.01 MHz)
Constant Current mode:
200 µA to 20 mA, 1 V max.
(up to 10.00 MHz)
200 µA to 10 mA, 0.5 V max.
(above 10.01 MHz)

Measurement Frequency
100 kHz to 120 MHz

Measurement Range
9700-01 HEAD AMP UNIT:
100 m-ohm to 1 k-ohm
9700-02 HEAD AMP UNIT:
100 ohm to 10 k-ohm
9700-03 HEAD AMP UNIT:
1 k-ohm to 100 k-ohm
A Heap Amp Unit and Test Fixture are not supplied with the unit. Please select the Head Amp and the Test Fixture options for your application.
Head Amp Unit must be factory adjusted for dedicated use with the main unit before delivery.

Measurement Time
6 ± 1 msec.

Comparator Functions
Upper and lower limit
absolute value or percentage

Power Supply
100 to 240 V AC, 50/60Hz

Dimensions, mass
360 mmW × 130 mm (H) × 360 mm (D), 8.3 kg

s 

 

3560 AC m-Ohm HiTESTER

For measurement requirements from contact resistance to internal resistance and voltage of batteries

The instrument also features an Ohm and V mode that allows simultaneous measurement and comparison of battery internal resistance and open-circuit voltage. It is highly suitable for battery inspection lines as one unit can act as both a low-resistance meter and DMM.

BASIC SPECIFICATIONS

Measurement Ranges and Accuracy
30 m-Ohm to 3 k-Ohm, 6 ranges, ±0.5 % rdg. ±8 dgt. (all ranges)
In the case of MEDIUM: Add 3 dgt. to the above dgt. error
In the case of FAST: ±0.5 % rdg. ±8 dgt. (30 m-Ohm), ±0.5 % rdg. ±6 dgt. (other ranges)
However, in the case of FAST, the display counter decreases 4 digits in all ranges.

Measurement Current
7.4 mA (30 m-Ohm range) to 1.5 ƒÊA (3 k-Ohm range)

Max. Applied Measurement Voltage
60 V DC (AC input is not possible)

Sampling Speed
50 times/s (FAST) to 1.56 times/s (SLOW) at 50 Hz mode
60 times/s (FAST) to 1.88 times/s (SLOW) at 60 Hz mode

Display
31,000 full digits (resistance), 50,000 full digits (voltage), Fluorescent tube

Measurement Method
1 kHz AC four-terminal measurement

Open-Circuit Terminal Voltage
20 mV peak max. (30 m-Ohm to 3 k-Ohm all ranges)

Comparator Functions
Setting: Upper and lower limit, Up to 30 tables
Output: 3 levels (Hi, In, Lo) or (Pass, Fail), Open-collector, display, beep sound

Interface
RS-232C (standard), GP-IB or External printer (option)

Power Supply
100 to 240 V AC (50/60 Hz)

Dimensions, mass
215 mm (8.46 in) W × 80 mm (3.15 in) H × 320 mm (12.6 in) D, 2.1 kg (74.1 oz)

Accessories
9287 CLIP-TYPE LEAD(1), Power cord(1)

 

 
Copyright © 2004-2006 Solcom, Inc. All rights Reserved.